Robbies 02wrx 551whp/441wtq

[robbieshonda]

Hey all just thought id give you guys an update i finally got my car on the rollers the otherday. At 29-30 tapering to 28 ish on 93 oct with some 110 offthe pump i made 551/441 mustang dyno. Ill copy paste alot more info when i get on my computer later. Should be toss g her down the tra k tommorrow night at the nyce1s.com north vs south shootout. A few shakedown runs on the access road by the shop are showing 130-140 mph so maybe ill hit a mid 10 on my street tires. If a 9 looks acheiveable ill put some slicks on and turn up the boost and make it happen. I have factory radiator caps and they wont hold so i need to put a few 1.9bar caps on it and I should be fine.



Event: Dyno Tune
Location: Epic Motorsports Fayetteville NC
Ambient Temp: 103*
Elevation:240ft
Weather: Sunny, Hot, and Humid
Track and Conditions:
Tires: Falken 412's

Car: 2002 Subaru WRX
Tuner: Robbie and Babi ( Bobby) Epic Motorsports Tuners
Dyno Info: Mustand AWD 1100
Transmission: Stock 2006 STi 6 speed
Gear: 4th
Peak HP at RPM: 551.5 @ 7300
Peak Torque at RPM: 441.1 @5700
Baseline hp/tq for a stock on same dyno: 190/190
Target Boost: 30psi
Target AFR: 11.4
Fuel: 3 gallons marathon 93 oct, 5 gallons of vp110 pump gas sold at marathon.

Engine/Power Modifications: AR Fabrication Designed and Machined Sleeved 2.0 block, Custom Arias 4" pistons, Crower I beam rods, Cobb Tuning Pro Series 81mm Billet Crankshaft. 2ltr heads, stock ports, standard sized Manley valves, Manley valve springs and retainers Kelford 272 OTS Camshafts,AR Fabrication up pipe and down pipe,PTE 6262 turbo .82 hotside, Tial 44mm ewg, Tial Q bov, Buschur racing lightweight thinwall stainless exhaust, PTE 850hp fmic core, customer stainless piping, ID 1000cc injectors, Epic fuel rails and lines, APS tgv deletes, factory intake manifold port matched to tgv housings, Fuel Lab fuel pressure regulator, single Walbro 255 fuel pump, Killer B oil pickup, Factory wrx exhaust manifold.

Driveline Modifications: ACT 6 Puck Stock Flywheel, Torque Solution pitch stop,motor mounts, transmission mounts, shifter bushings, all the other goodies. Brembos, Stop Tech Pads, DBA Rotors.
Suspension Modifications: BC Coilovers, full sti suspension and lateral links ect ( car was fully converted to an sti then a 2.something liter dropped in.)

Other Modifications:
I'm sure there is something Im not remembering right now.


Future Mods: Covert Performance header, up pipe and down pipe all vband, Covert Performance Surge Tank, Bosch 044 or larger pump, another set of ID 1000 injectors, and maybe some E85, If I dont hit my 700whp goal then Im stepping up to a PTE 6765, or a Borg Warner s400.

Taking the car to the track on saturday at the Nyce1s.com North vs South shootout here in Fayetteville NC this Saturday. Running some crap tires but id like to see a 10 sec pass.

BTW I daily drive this car with my daughter, and my room mates 2 daughters everyday so dont be suprised to see it go down the track with 3 car seats in it lol
:banana:

[url="http://www.youtube.com/watch?v=rqlQ3jgJAM8"]http://www.youtube.com/watch?v=rqlQ3jgJAM8[/url]






Stock 2006 STi vs my car






Size referance my wife and my turbo

[Justin 05 Sti]

Wowzers!

In for build info, dyno sheet, videos...

[BoostedM3]

Unbelievable...we need graphs,pics....NOW!!!

[robbieshonda]

More info up. I pulled it over 8k yesterday on the street to make sure she felt good and would hold together. the 6 speed I have is an 06 sti and i refuse to leave 4th gear before i cross the quarter lol.


Wish youall could come down this weekend this race is going to be pretty big

[ElScooby]

More info up. I pulled it over 8k yesterday on the street to make sure she felt good and would hold together. the 6 speed I have is an 06 sti and i refuse to leave 4th gear before i cross the quarter lol.


Wish youall could come down this weekend this race is going to be pretty big

Man your care sounds like a freaking monster!

I wish I could come and watch this weekend but I am wathing my kids while my wife goes out and has a blast on a trip. Maybe in the future when my brother gets back from Bahrain in a couple of weeks I will be in your neck of the woods. I might make it a combo trip, see my brother and see some good racing.

[ndwolfwood]

how much did your motor build run you...im looking for the same in a future build, same numbers kinda...about 500hp

[robbieshonda]

I built it lol so Id have to go through and figure out what it would cost for a customer to build it.

[VF34RX]

I thought you went with a 2.5 block. But thats badass, i've been wondering what a built 2.0 would perform like.

[ndwolfwood]

im just curious parts wise, shop labor is gonna be different for each car...looks clean as hell btw

[WRXNFX]

Car is HOT...

Good build brother!!

[Hydrolix]

Wow! That is one sweet bugeye.

Did you tune that yourself? I've never seen a power curve that smooth on a Subie before!

[yaya]

Love seeing a built 2.0. I bet she's a blast to drive. Congrats!

Hope to get bigger setup like that on my 2.0 some day too.

[bigboy]

so i went to hang out with robbie this weekend and attend a race close by....

let me say that his car pulls SO HARD...its stupid fast.

[robbieshonda]

yeah built by me and tuned by myself, and my evo tuner babi.

No times yet I think I may have upset my cometic head gaskets the other day when i tried pushing 35psi. So Im pulling the motor tomorrow night to change the head gaskets. I havent had much time lately to work on the car as my wife left me but her 18 year old replacement is more than willing to come help me pull the motor and tear it down lol

[scooby_rex]

that sucks to hear, I'm sure shop hours dont help anyone

car is amazing though!