PDA

View Full Version : Magnaflow Cat BNIB



rookrex
03-03-2010, 05:13 PM
I have an ebay downpipe for sale. It's not the stock length, it's about 6-7" too long so I'm told that it goes to a different style catback exhaust. SOLD

I also have a magnaflow cat BNIB that I bought because I was going to get it all put in together but I found a different downpipe and went that route.

I just need to get rid of this stuff! Anyone? Lowball me, the worst I could say is no. :D

http://lh3.ggpht.com/_9UEXv12TQxk/S7FrWY44TJI/AAAAAAAABjY/B3I_KeRVmlE/s400/Photo0102.jpg
http://lh6.ggpht.com/_9UEXv12TQxk/S7FrW09d56I/AAAAAAAABjc/gnEXZpSLobg/s400/Photo0103.jpg
http://lh3.ggpht.com/_9UEXv12TQxk/S7FrXqnPr-I/AAAAAAAABjg/VznzjLdpIqA/s400/Photo0104.jpg

summerandjoe
03-03-2010, 05:18 PM
so, the downpipe is too long to bolt up to your current catback? maybe take it to an exhaust shop and have them trim it down and weld on a flange?

Photoroller
03-03-2010, 05:50 PM
This will not bolt up to ANY USDM length downpipe.

Ebay only. The person who gets this must use an ebay catback or have it trimmed.

NachO_SRT
03-03-2010, 06:08 PM
I have an ebay downpipe for sale. It's not the stock length, it's about 6-7" too long so I'm told that it goes to a different style catback exhaust. I'm not sure of brands but I'm assuming the Ebay on is shorter. Any input would be appreciated as to what it might fit.

I just need to get rid of it so I can buy a downpipe that fits my stock length catback.

What do you thinks fair for it? $60?


run it and your car down to MKC, have scotty make it fit - BOOM done -


NachO

rookrex
03-03-2010, 07:42 PM
Well, I just might have to go through MKC, sounds like that may be the best bet for me. Just have to get these damn taxes done first for some $$$. (Hopefully) 8)

WRXNFX
03-03-2010, 10:55 PM
I have an ebay downpipe for sale. It's not the stock length, it's about 6-7" too long so I'm told that it goes to a different style catback exhaust. I'm not sure of brands but I'm assuming the Ebay on is shorter. Any input would be appreciated as to what it might fit.

I just need to get rid of it so I can buy a downpipe that fits my stock length catback.

What do you thinks fair for it? $60?


run it and your car down to MKC, have scotty make it fit - BOOM done -


NachO

Pretty good call here..

May have to switch to a flat flange with a gasket, that would be so rally.. turn the key and the tip jumps. 8)

Just4fuN
03-04-2010, 04:32 AM
Well, I just might have to go through MKC, sounds like that may be the best bet for me. Just have to get these damn taxes done first for some $$$. (Hopefully) 8)

They ought to be able to sort out that rounded bolt issue of yours, as well, if you haven't already.

NachO_SRT
03-04-2010, 07:27 AM
If you want to see some amazing work from scotty check this out -

This started life as a stock 3 inch Down pipe from MPx.

http://mkcperformance.com/blog1/wp-content/gallery/nacho_srt/07-19-2009_mkc-101.jpg

Now it's 3 inch V-band with a recirc WG dump so it stays stealthy, until it shoots a 10 foot fireball on a FFS, lol.


NachO

Miracle max
03-04-2010, 12:48 PM
If you want to see some amazing work from scotty check this out -

This started life as a stock 3 inch Down pipe from MPx.

http://mkcperformance.com/blog1/wp-content/gallery/nacho_srt/07-19-2009_mkc-101.jpg

Now it's 3 inch V-band with a recirc WG dump so it stays stealthy, until it shoots a 10 foot fireball on a FFS, lol.


NachO

Thats pretty bad ass!

rookrex
03-04-2010, 02:08 PM
I have an ebay downpipe for sale. It's not the stock length, it's about 6-7" too long so I'm told that it goes to a different style catback exhaust. I'm not sure of brands but I'm assuming the Ebay on is shorter. Any input would be appreciated as to what it might fit.

I just need to get rid of it so I can buy a downpipe that fits my stock length catback.

What do you thinks fair for it? $60?


run it and your car down to MKC, have scotty make it fit - BOOM done -


NachO

Pretty good call here..

May have to switch to a flat flange with a gasket, that would be so rally.. turn the key and the tip jumps. 8)

Hey Jeff, what are you talking about here? I'm a little confused, but the term "tip jumps" has intrigued me. :D

VF34RX
03-04-2010, 02:52 PM
Hey Jeff, what are you talking about here? I'm a little confused, but the term "tip jumps" has intrigued me. :D

Just means your exhaust shakes a little upon start up. Or atleast i think that is what he is getting at.

rookrex
03-04-2010, 02:58 PM
That makes more sense. I was really just lost trying to think what he was referring too :oops: :lol: :lol:

rookrex
03-18-2010, 07:29 AM
So I'm putting the downpipe back up for sale, I just got a used Invidia downpipe and I figure this is just going to be taking up space in the garage. Obviously you'd still have to get the eBay catback or go to MKC to get it custom made.

I also have a Magnaflow Cat that is brand new. I don't even think I've opened the box. I originally was going to get it all welded up together but then I found the deal on a catted Invida downpipe.

Shoot me an offer on all of it or either one. I just need to get this out of the garage! :D

rookrex
03-22-2010, 08:15 AM
Bump!

rookrex
03-26-2010, 09:11 AM
Noone? Not even a lowballer?

NoAffiliationSTi
03-26-2010, 01:47 PM
They don't know what they are missing on the magnaflow system... it sounds exactly like a Cobb...I just put my system on the sti tuesday night.

You may want to post up which magnaflow kit it is you have since there is more than 1 style.

rookrex
03-29-2010, 01:41 PM
Bump, some pictures added.

NoAffiliationSTi
03-29-2010, 08:13 PM
pics no workie

rookrex
03-29-2010, 10:14 PM
Now they should work! 8)

NoAffiliationSTi
03-30-2010, 11:22 AM
cat specs

3" inlet
6.5" wide (oval bodied)
13" tip to tip
9" body

rookrex
04-02-2010, 08:09 AM
Bizump!

rookrex
04-07-2010, 07:30 AM
Downpipe sold! Now I just the magnaflow cat for sale!

NoAffiliationSTi
04-07-2010, 01:06 PM
$30?

rookrex
04-07-2010, 01:30 PM
^^ PMed.