PDA

View Full Version : Good place to get a Pro tune in the KC area?



Blakecap
08-21-2013, 08:28 PM
Anyone know a good place to get a tune?

Kilby33
09-02-2013, 01:12 AM
Chad tuned my car at Modified by KC, he did a great job! I believe they have the only awd dyno in the kc area. I did have a few af issues due to a bad front o2 sensor, got that squared away and I sent him some log from the ap and he emailed me my new map. I highly recommend!

728 Southwest Blvd
Kansas City, KS 66103

913-432-8468

www.mkcperformance.com


There is also some ppl on here that can tune it for you I have also heard good things about them too!

NachO_SRT
09-02-2013, 05:45 AM
+1 for MKC - MY2009 was tuned off the showroom floor by Chad.

S0+Protune @ 34mi
S1+Protune @ ~500mi
S2+Protune @ ~3500mi

Just about to flip 27,000 on it.

05kcWRX
09-03-2013, 01:53 PM
What does a tune like that cost???

alexfromop
09-03-2013, 04:54 PM
I think Chad's charging 400-450 for a tune these days. Chad/Ryan correct me if I'm wrong.

NachO_SRT
09-06-2013, 06:01 AM
Just to add to this thread - Chad converted my Si-Drive into a boost controller switch.

WGA Spring pressure = I mode
18psi = S mode
23psi = S# mode

The E-throttle is remapped to a 1:1 it feels like a cable controlled throttle.

I just did the Stumble mod fix, it was never bad, but you could feel it studder just a bit @ 1900, 2400, 3400 RPM. Chad did a very good job of tuning around the stumble caused by the harmonic pulses in the GR fuel lines. I'll be back at MKC to have the tune smoothed out after the stumble fix.

My car only saw a stock tune for the trip to MKC from LSS and then 3 stock dyno pulls. (234/234 bone stock, with [email protected])

Currently:
iNvidia N1 Race TBE
AMR TMIC
Perrin CAI + Turbo inlet
RCE Blacks
AP F/R Sways 24mm/22mm
Cobb BoV

310/370 91oct.

I'm just about ready for another round, Fuel, Grimmspeed IM/TGV's, AWIC. (340awhp goal)
Next year, longblock/TS EFR. (500awhp + DD goal)

I've been tossing around the idea of a KAPS SS system

I'll be using MKC for all of it. Hard to find a tuner/shop that you can talk with. Ryan and Chad are both very good at this business.

kcwrxfan
09-06-2013, 07:46 AM
Just to add to this thread - Chad converted my Si-Drive into a boost controller switch.

WGA Spring pressure = I mode
18psi = S mode
23psi = S# mode

The E-throttle is remapped to a 1:1 it feels like a cable controlled throttle.

I just did the Stumble mod fix, it was never bad, but you could feel it studder just a bit @ 1900, 2400, 3400 RPM. Chad did a very good job of tuning around the stumble caused by the harmonic pulses in the GR fuel lines. I'll be back at MKC to have the tune smoothed out after the stumble fix.

My car only saw a stock tune for the trip to MKC from LSS and then 3 stock dyno pulls. (234/234 bone stock, with [email protected])

Currently:
iNvidia N1 Race TBE
AMR TMIC
Perrin CAI + Turbo inlet
RCE Blacks
AP F/R Sways 24mm/22mm
Cobb BoV

310/370 91oct.

I'm just about ready for another round, Fuel, Grimmspeed IM/TGV's, AWIC. (340awhp goal)
Next year, longblock/TS EFR. (500awhp + DD goal)

I've been tossing around the idea of a KAPS SS system

I'll be using MKC for all of it. Hard to find a tuner/shop that you can talk with. Ryan and Chad are both very good at this business.

I think I saw you yesterday on SMPW. your N1 is a single tip on the passanger side correct? If so i was behind you but not in my WRX, nice looking car if it was you.

NachO_SRT
09-06-2013, 08:29 AM
^^^^^ - that was me - I work off SMPW and Lamar.

And, thank you. Owning gold BBS's is like having 4 dirty little kids.

WA-GONE09
09-06-2013, 09:01 AM
^ couldn't agree more on the goldies getting black after .01 miles of driving. ha but don't they look amazing when they are clean lol

another happy MKC customer, had Chad tune my 09 STI stage 2 and Ryan fabbed up a custom single side for it. 305hp/376tq was my best on S#.

I know my old roommate Edub370 had his 370z was tuned by Chad as well He even learned a new software (uprev) so he could do tuning on it.
The guys over at MKC are def top notch and I would recommend them always for tuning and work. they know their shit, that's for sure.

Justin 05 Sti
09-06-2013, 03:30 PM
I think Chad's charging 400-450 for a tune these days. Chad/Ryan correct me if I'm wrong.

Yep:

http://www.mkcperformance.com/services/efi-tuning-rates/

kcwrxfan
09-08-2013, 08:43 PM
^^^^^ - that was me - I work off SMPW and Lamar.

And, thank you. Owning gold BBS's is like having 4 dirty little kids.

Nice, the rims did look good. I live right down the road in mission maybe ill seems when I am in my wrx.

05kcWRX
09-12-2013, 09:31 AM
I've heard the name Kyle used before with tuning our cars and that he does them for a price. No clue what type of tune but heard he is very knowledgeable. Not really sure but if anyone can enlighten on this that would be great.

muajg
09-12-2013, 12:56 PM
Chad at MCK + another one. He tuned my Legacy GT. I didn't want to increase boost, just the fuel air ratio. But man it complety changed the car and made it great. I miss that car every day.